Melhor fabricante de bobinas de aço
Melhor fabricante de bobinas de aço
www.chinaxinogroup.com/xy
86-532-8670 5786
86-532-8670 5786
info@xinosteel.com
86-158 9880 2017
BOXING,SHANDONG / TIANJIN / HEBEI
QINGDAO / TIANJIN /BEIJING / HONGKONG
Tubos de acero corrugado galvanizados en caliente. Fabricado a partir de secciones corrugadas unidas por tornillos y tuercas. TUBERÍAS DE METAL CORRUGADAS,PLACAS DE REVESTIMIENTO PARA TÚNELES, ALCANTARILLA METÁLICA CORRUGADA,Fabricado a partir de secciones corrugadas unidas por tornillos y tuercas.
Drenaje pluvial de carreteras y aeropuertos
NORMAS TÉCNICAS:
NTE INEN 1674
AASHTO M36.
Cumplimiento de especificaciones generales para la construcción de Caminos y Puentes
Las alcantarillas están formadas por placas metálicas fabricadas en acero estructural con dos tipos de corrugación: PP - 68 y PM - 100, las cuales son
posteriormente armadas mediante pernos de alta resistencia.
Tubos de acero corrugado galvanizados en caliente. Fabricado a partir de secciones corrugadas unidas por tornillos y tuercas.
Para conducción de agua, encamisado de tuberías, ejecución de pasos bajo taludes etc.
Sección circular, ovoide o en arco. Diámetros desde 500 mm a 6 metros.
Corrugated steel pipe culvert refers to the culvert pipe laid under the highway railway. The corrugated steel culvert adopts standardized design centralized production with short production cycle. During site installation,foundation construction culvert pipe installation can be implemented separately ,so the construction period is short. Reduce abandon conventional building materials very environmental protection. The structure of corrugated pipe culvert has reasonable stress, uniform load distribution certain deformation resistance.
Our products are widely used in highway railway culverts, bridge culvert, water storage tank, granary, drainage facilities, material pipeline, tunnel lining, pipeline protection, sightseeing corridor, etc.
Thickness | 0.127-12mm |
Width | 500-1600mm |
Length | As request |
Zinc coating | 50-610g/m2 |
Pitch | 68 / 75 / 100 / 125 / 125 150 / 200 / mm as request |
Wave height | 13 / 20 / 25 / 50/ 55mm as request |
Wave No. | 8-12 |
Type | steel plate |
Weight of each package | about 3 mt |
Technology | cold rolled |
Material | SGCC SGCH |
Standard | ASTM,GB,JIS,DIN |
Price | FOB Xingang |
Packing | packed in iron sheet lined with kraft paper as per client's request. |
Surface treatment | galvanized,corrugated,bright finished,chromated,oiled( unoiled)
|
Delivery time | within 30 days after receiving the down payment irrevocable L/C at sight
|
Payment | 30% down payment of the total value by T/T the balance must be paid by T/T irrevocable L/C at sight after the goods finished. |
Application | it is widely used in construction, factory warehouse,etc.
|
Bolts, nuts, gaskets, sealant
Extrude
Punching hole arched shape
Hot-dip Galvanized Epoxy Coating
Indonesian customers visit our factory
1. High strength: 1.5-3 times stronger than concrete .
2. Light weight: 1/15-1/5 weight of same specification concrete weight.
3. Long service life: normally more than 100 years.
4. Low cost: when the span is larger than 1meter, the bigger the span is, the more obvious it shows
5. Convenient construction: no need of large machinery, only little manual operation.
6. Axial direction: can be used in a severe sedimentation area.
7. Shorten construction period for about half time, save labor charges.
8. avail to improving the structure of the soft soil foundation the interlocking of the junction of the embankment, which improves the comfortableness of the car on the bridge.
9. Environmental, low carbon:Reduce abandon normal construction materials, like concrete, yellow sand, cobblestone, woods, which means a lot to environment.
10. Convenient maintenance, even no need to maintain under certain condition, lower the operating Cost..
<td style="box-sizing: content-box; margin: 0px; padding: 0px; font-style: inherit; font-variant: inherit; font-stretch: inherit; line-height: inherit; font-family: inherit; float: none; border-color: rgb(204
